home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Deluxe Multimedia CD Pack
/
Deluxe Multimedia CD Pack.iso
/
g106
/
manual
/
manual.wri
(
.txt
)
Wrap
Word Document
|
1997-10-22
|
324KB
|
1,287 lines
Table of Content
1. SiS6326 Overview
1.1 Introduction
1.2 Features
2. Mode Tables
2.1 Standard VGA Modes
2.2 Enhanced Video Modes
2.3 Low Resolution Modes (Hidden)
3. Drivers Overview
4. Windows 95
4.1 Version Note
4.2 Driver Files
4.3 Display Driver
4.3.1 Installation
4.3.2 Using "Display Modes"
4.3.3 Using "SiS TV-OUT"
4.3.4 Using "SiS Gamma Correction"
4.4 Display Utilities
4.4.1 Installation
4.5 MPEG2 Video Playback Utility
4.5.1 Installation
4.5.2 Operation
5. Windows 3.1
5.1 Version Notes
5.2 Driver Files
5.3 Installation
5.4 SVGA Setup
5.4.1 Graphics Setup
5.4.2 Power Saving Setup
5.4.3 Zoom_Key Setup
5.4.4 Notes
5.5 Video Operations
5.5.1 DCI Function
5.5.2 SiS MMPlayer (SW MPEG)
5.5.3 Notes on MMPlayer
6. Windows NT 4.0
6.1 Driver Files
6.2 Installation
6.3 Using "Display Modes"
7. Windows NT 3.5 & 3.51
7.1 Driver Files
7.2 Installation
8. Autodesk ADI 4.2 -Protected Mode
8.1 General Description
8.1.1 Driver Files
8.1.2 Unpack & Copy
8.2 AutoCAD R11 Setup
8.3 AutoCAD R12 Setup
8.4 AutoShade R2.0 Setup
8.5 3D Studio Version 3.0 Setup
9. OS/2 V2.1
9.1 Driver Notes
9.2 Driver Files
9.3 Installation
10. OS/2 V3.0 (Warp)
10.1 Driver & OS/2 Version Notes
10.2 Driver Files
10.3 Installation
11. Double Bytes OS/2 Warp
11.1 Driver & OS/2 Version Notes
11.2 Driver Files
11.3 Installation
12. COPYRIGHT NOTICE
I.SiS6326 Overview
A.Introduction
Targeting the emerging PC market, SiS6326 is the first member of the
new SiS63x6 family, which consists of high integration, super
performance, and feature-rich 3D/2D graphics & video accelerators.
Being a 208-pin PQFP package, SiS6326 integrates AGP/PCI VGA
controller, 3D/2D graphics accelerator, NTSC/PAL TV-OUT solution, MPEG-
2/1 video decoder, and video accelerator. The target of SiS6326 is to
meet all the emerging PC requirements which includes 3D acceleration,
output to TV, DVD/VCD player, and video acceleration in one chip and in
a market acceptable price.
As the first member of 63x6 family, totally new pin-outs and
application circuits are developed. However the definition of the
registers are designed as backward compatible with previous SiS62x5 as
possible as to shorten the product-to-market time.
A.Features
PCI Bus Interface
1. Supports 32-bit PCI local bus standard Revision 2.1 compliant
2. Supports 66MHz PCI operation
3. Supports PCI bus master for 3D texture fetch
4. Built-in write-once subsystem vendor ID configuration register
5. Supports zero wait-state memory mapped I/O burst write
6. Built-in 8 stages PCI post-write buffer to enhance frame buffer
write performance
7. Built-in 128 bits read cache to enhance frame buffer read
performance
8. Supports full 16-bit re-locatable VGA I/O address decoding
9. Supports PCI multimedia design guide Rev. 1.0
AGP Interface
10. Supports AGP 1.0 compliant configuration setting
11. Supports AGP 133MHz
High Performance & High Quality 3D Accelerator
12. Built-in a high performance 3D engine
- Built-in 32-bit floating point format VLIW triangle setup engine
- Built-in texture cache with LRU replacement strategy
- Supports PCI master and AGP 133 MHz for texture fetch
- Peak polygon rate: 800K polygon/sec @ 50 pixel/polygon with
Gouraud shaded, point-sampled, linear and bilinear texture mapping
- Peak fill rate: 40M pixel/sec
13. Built-in a high quality 3D engine
- Supports solid, flat, and Gouraud shading
- Supports high quality dithering
- Supports Z-test, Alpha-test, and scissors clipping test
- Supports stipple patterns, stipple alpha, line pattern, and ROP
- Supports Z-buffer and alpha buffer
- Supports per-pixel texture perspective correction
- Supports point-sampled, linear, bi-linear, and tri-linear texture
filtering
- Supports MIP structure texture
- Supports rectangle structure texture
- Supports 1/2/4 BPP palletize texture
- Supports 1/2/4/8 BPP luminance texture
- Supports 4/8 BPP mix mode texture format
- Supports 8/16/24/32 BPP RGB/ARGB texture format
- Supports video texture in all supported texture formats.
The supported video formats are RGB555, RGB565, and YUV422 formats
- Supports texture transparency, blending, wrapping, mirror, and
clamping
- Supports fogging, alpha blending, and primitive transparency
High Performance 2D Accelerator
14. Built-in 42 double-words hardware command queue
15. Supports Turbo Queue (Software Command Queue in off-screen memory)
architecture to achieve extra-high performance (patent pending)
16. Built-in Direct Draw Accelerator
17. Built-in an 1T 64-bit BITBLT graphics engine with the following
functions:
- 256 raster operations
- Rectangle fill
- Color/Font expansion
- Enhanced Color expansion
- Enhanced Font expansion
- Line-drawing with styled pattern
- Built-in 8x16 pattern registers
- Built-in 8x8 mask registers
- Rectangle Clipping
- Transparent BitBlt
- Direct Draw
18. Supports memory-mapped, zero wait-state, burst engine write
19. Supports burst frame buffer read/write for SDRAM/SGRAM
20. Built-in 64x64x2 bit-mapped hardware cursor
21. Maximum 4M Bytes frame buffer with linear addressing
22. Built-in 4 stages engine write-buffer and 9x64 bits read-buffer to
minimize engine wait-state
23. Built-in 64x32 CRT FIFOs to support super high resolution graphics
modes and reduce CPU wait-state
Complete TV-OUT Solution
24. Built-in complete NTSC/PAL video encoder
- Built-in 3-Channel 10-bit DAC with power down mode
- Built-in 3-line anti-flicker filter
- Built-in TV sense circuits for auto detect TV connection
- Supports RCA-style composite video and S-Video outputs
- Supports loadable RAMDAC for gamma correction in high color and
true color modes
- No external TTL or DAC required
25. Supports NTSC/PAL interlaced display in
- 640x480x60Hz and 640x400x60Hz modes for NTSC
- 640x480x50Hz and 800x600x50Hz modes for PAL
- low resolution modes for both NTSC and PAL (hidden)
26. Supports non-interlaced scan, output either even or odd lines
27. Supports 4 types of filtering mode: mild, medium, strong, and
adaptive
28. Supports VGA and TV simultaneous output
29. Supports TV image positioning by hardware
30. Supports under-scan and over-scan scaling
MPEG-2/1 Video Decoder
31. MPEG-2 ISO/IEC 13818-2 MP@ML and MPEG-1 ISO/IEC 11172-2 standards
compliant
32. Low cost design based on MPEG macro-block layer decoding
architecture
- Built-in run length and zig-zag decoder
- Built-in IDCT logic
- Built-in motion compensation logic
33. 14 bits resolution in IDCT transformation
34. Half pixel resolution in motion compensation
35. Built-in two 196x64 video line buffers for MPEG video playback
Video Accelerator
36. Supports single frame buffer architecture
37. Supports YUV-to-RGB color space conversion
38. Supports bi-linear video interpolation with integer increments of
1/64
39. Supports graphics and video overlay function
- Independent graphics and video formats
- 16 color-key and/or chroma-key operation
- 3-bit graphics and video blending
- Rectangular video window modes
40. Supports current scan line of refresh read-back
41. Supports tearing free double buffer swapping
42. Built-in video decoder interface
- Philips SAA7110/SAA7111
- Brooktree BT815/817/819A (8-bit SPI mode 1,2)
43. Supports VMI to connect VMI devices
- Shares VMI control and data bus with MD bus
44. Supports Vertical Blank Interrupt
45. Supports RGB555, RGB565, YUV422, and YUV420 video format
46. Built-in 64x16 video capture FIFOs to support video capture
47. Built-in two 196x64 video playback line buffers
48. Supports DCI Drivers
49. Supports Direct Draw Drivers
Display Memory Interface
50. Supports FP, EDO, one-cycle EDO, SDRAM, and SGRAM timing
51. Supports 1MB, 2MB, and 4MB memory configurations
52. Supports 256Kx4, 256Kx8, and 256Kx16 FP and EDO DRAM types
53. Supports 2-CAS/1-WE DRAM and EDO DRAM types
54. Supports 256Kx32 SDRAM and SGRAM types up to 83.3 MHz
55. Supports 32/64-bit display memory path
56. Supports auto memory size detecting
High Integration
57. Built-in programmable 24-bit true-color RAMDAC up to 175MHz pixel
clock
- Built-in reference voltage generator and monitor sense circuit
- Supports loadable RAMDAC for gamma correction in high color and
true color modes
58. Built-in dual-clock generator
- Integrates PLL loop filter
59. Built-in 14.318 MHz oscillator circuits
60. Built-in two 196x64 video line buffers for MPEG video playback
61. Built-in standard feature connector logic support
62. Built-in PCI multimedia interface
Resolution, Color & Frame Rate
63. Supports 175 MHz pixel clock
64. Supports super high resolution graphics modes
- 640x480 256/32K/64K/16M colors 85Hz NI
- 800x600 16/256/32K/64K/16M colors 85Hz NI
- 1024x768 16/256/32K/64K/16M colors 85Hz NI
- 1280x1024 16/256/32K/64K colors 75 Hz NI
- 1600x1200 16/256 colors 65Hz NI
- low resolution modes (hidden)
65. Supports virtual screen up to 2048x2048
66. Supports 80/132 columns text modes
Power Management
67. Supports VESA Display Power Management Signaling (DPMS) compliant
VGA monitor for power management
68. Built-in 30 min. standby and suspend timers with keyboard, hardware
cursor, and/or video memory read/write as activation source
69. Supports direct I/O command to force graphics controller into
standby/suspend/off state
70. Power down internal SRAM in direct color mode
71. Built-in a low power signal pin for supporting external power down
controller
Multimedia Application
72. Supports DDC1 and DDC2B specifications
73. Supports RAMDAC snoop for multimedia applications
Miscellaneous
74. Only 3 ICs (including DRAMs) required to implement a PCI true-color
graphics adapter without any TTLs
75. Supports 64K Bytes ROM decoding
76. Supports Signature Analysis for automatic test
77. Implemented by 3.3V CMOS technology with 5.0V tolerance I/O buffers
78. 208-pin PQFP package
Jumper Setting
JP1 Open: NTSC
Short: PAL
JP2 Open: Disable INTA
Short: Enable INTA
I.Mode Tables
A.Standard VGA Modes
MODE TYPE DISPLAY SIZE COLORS SHADES ALPHA FORMAT BUFFER START
BOX SIZE MAX. PAGES
0 A/N 320x200 16 40x25 B800 8x8 8
0* A/N 320x350 16 40x25 B800 8x14 8
0+ A/N 360x400 16 40x25 B800 9x16 8
1 A/N 320x200 16 40x25 B800 8x8 8
1* A/N 320x350 16 40x25 B800 8x14 8
1+ A/N 360x400 16 40x25 B800 9x16 8
2 A/N 640x200 16 80x25 B800 8x8 8
2* A/N 640x350 16 80x25 B800 8x14 8
2+ A/N 720x400 16 80x25 B800 9x16 8
3 A/N 640x200 16 80x25 B800 8x8 8
3* A/N 640x350 16 80x25 B800 8x14 8
3+ A/N 720x400 16 80x25 B800 9x16 8
4 APA 320x200 4 40x25 B800 8x8 1
5 APA 320x200 4 40x25 B800 8x8 1
6 APA 640x200 2 80x25 B800 8x8 1
7 A/N 720x350 4 80x25 B000 9x14 8
7+ A/N 720x400 4 80x25 B000 9x16 8
0D APA 320x200 16 40x25 A000 8x8 8
0E APA 640x200 16 80x25 A000 8x8 4
0F APA 640x350 2 80x25 B000 8x14 2
10 APA 640x350 16 80x25 A000 8x14 2
11 APA 640x480 2 80x30 A000 8x16 1
12 APA 640x480 16 80x30 A000 8x16 1
13 APA 320x200 256 40x25 A000 8x8 1
NOTE: 1. A/N: Alpha/Numeric
2. APA: All Point Addressable (Graphics)
MODE DISPLAY SIZE COLORS SHADES FRAME RATE. H-SYNC. VIDEO
FREQ.
0 320x200 16 70 31.5 K 25.1 M
0* 320x350 16 70 31.5 K 25.1 M
0+ 360x400 16 70 31.5 K 28.3 M
1 320x200 16 70 31.5 K 25.1 M
1* 320x350 16 70 31.5 K 25.1 M
1+ 360x400 16 70 31.5 K 28.3 M
2 640x200 16 70 31.5 K 25.1 M
2* 640x350 16 70 31.5 K 25.1 M
2+ 720x400 16 70 31.5 K 28.3 M
3 640x200 16 70 31.5 K 25.1 M
3* 640x350 16 70 31.5 K 25.1 M
3+ 720x400 16 70 31.5 K 28.3 M
4 320x200 4 70 31.5 K 25.1 M
5 320x200 4 70 31.5 K 25.1 M
6 640x200 2 70 31.5 K 25.1 M
7* 720x350 4 70 31.5 K 28.3 M
7+ 720x400 4 70 31.5 K 28.3 M
0D 320x200 16 70 31.5 K 25.1 M
0E 640x200 16 70 31.5 K 25.1 M
0F 640x350 2 70 31.5 K 25.1 M
10 640x350 16 70 31.5 K 25.1 M
11 640x480 2 60 31.5 K 25.1 M
12 640x480 16 60 31.5 K 25.1 M
13 320x200 256 70 31.5 K 25.1 M
NOTE: i - interlaced mode
n - noninterlaced mode
A.Enhanced Video Modes
MODE TYPE DISPLAY SIZE COLORS SHADES ALPHA FORMAT BUFFER START
BOX SIZE MAX. PAGES
22 A/N 1056x352 16 132x44 B800 8x8 2
23 A/N 1056x350 16 132x25 B800 8x14 4
24 A/N 1056x364 16 132x28 B800 8x13 4
25 APA 640x480 16 80x60 A000 8x8 1
26 A/N 720x480 16 80x60 B800 9x8 3
29 APA 800x600 16 100x37 A000 8x16 1
2A A/N 800x600 16 100x40 B800 8x15 4
2D APA 640x350 256 80x25 A000 8x14 1
2E APA 640x480 256 80x30 A000 8x16 1
2F APA 640x400 256 80x25 A000 8x16 1
30 APA 800x600 256 100x37 A000 8x16 1
37 APA 1024x768 16 128x48 A000 8x16 1
38 APA 1024x768 256 128x48 A000 8x16 1
39 APA 1280x1024 16 160x64 A000 8x16 1
3A APA 1280x1024 256 160x64 A000 8x16 1
3B APA 1600x1200 16 200x75 A000 8x16 1
3C APA 1600x1200 256 200x75 A000 8x16 1
40 APA 320x200 32K 40x25 A000 8x8 1
41 APA 320x200 64K 40x25 A000 8x8 1
42 APA 320x200 16.8M 40x25 A000 8x8 1
43 APA 640x480 32K 80x30 A000 8x16 1
44 APA 640x480 64K 80x30 A000 8x16 1
45 APA 640x480 16.8M 80x30 A000 8x16 1
46 APA 800x600 32K 100x37 A000 8x16 1
47 APA 800x600 64K 100x37 A000 8x16 1
48 APA 800x600 16.8M 100x37 A000 8x16 1
49 APA 1024x768 32K 128x48 A000 8x16 1
4A APA 1024x768 64K 128x48 A000 8x16 1
4B APA 1024x768 16.8M 128x48 A000 8x16 1
4C APA 1280x1024 32K 160x64 A000 8x16 1
4D APA 1280x1024 64K 160x64 A000 8x16 1
NOTE: 1. A/N: Alpha/Numeric
2. APA: All Point Addressable (Graphics)
MODE DISPLAY SIZE COLORS SHADES FRAME RATE. H-SYNC. VIDEO
FREQ.
22 1056x352 16 70 30.5 K 40.0 M
23 1056x350 16 70 30.5 K 40.0 M
24 1056x364 16 70 30.5 K 40.0 M
25 640x480 16 60 31.5 K 25.1 M
26 720x480 16 60 31.5 K 25.1 M
29 800x600 16 56 35.1 K 30.0 M
29* 800x600 16 60 37.9 K 40.0 M
29+ 800x600 16 72 48.0 K 50.0 M
29# 800x600 16 75 46.8 K 50.0 M
29## 800x600 16 85 53.7 K 56.3 M
2A 800x600 16 56 35.1 K 36.0 M
2D 640x350 256 70 31.5 K 25.1 M
2E 640x480 256 60 31.5 K 25.1 M
2E* 640x480 256 72 37.9 K 31.5 M
2E+ 640x480 256 75 37.5 K 31.5 M
2E++ 640x480 256 85 43.4 K 36.0 M
2F 640x400 256 70 31.5 K 25.1 M
30 800x600 256 56 35.1 K 36.0 M
30* 800x600 256 60 37.9 K 40.0 M
30+ 800x600 256 72 48.0 K 50.0 M
30# 800x600 256 75 46.8 K 50.0 M
30## 800x600 256 85 53.7 K 56.3 M
37i 1024x768 16 87 35.5 K 44.9 M
37n 1024x768 16 60 48.4 K 65.0 M
37n+ 1024x768 16 70 56.5 K 75.0 M
37n# 1024x768 16 75 60.2 K 80.0 M
37n## 1024x768 16 85 68.7 K 94.5 M
38i 1024x768 256 87 35.5 K 44.9 M
38n 1024x768 256 60 48.4 K 65.0 M
38n+ 1024x768 256 70 56.5 K 75.0 M
38n# 1024x768 256 75 60.2 K 80.0 M
38n## 1024x768 256 85 68.7 K 94.5 M
39I 1280x1024 16 87 48.8 K 80.0 M
39n 1280x1024 16 60 65.0 K 110.0 M
39n+ 1280x1024 16 75 80.0 K 135.0 M
3Ai 1280x1024 256 87 48.8 K 80.0 M
3An 1280x1024 256 60 65.0 K 110.0 M
3An+ 1280x1024 256 75 80.0 K 135.0 M
3Bi 1600x1200 16 87 75.6 K 135.0 M
3B 1600x1200 16 60 75.6 K 162.0 M
3B* 1600x1200 16 65 75.6 K 175.5 M
3Ci 1600x1200 256 87 75.6 K 135.0 M
3C 1600x1200 256 60 75.6 K 162.0 M
3C* 1600x1200 256 65 75.6 K 175.5 M
40 320x200 32K 70 31.5 K 25.1 M
41 320x200 64K 70 31.5 K 25.1 M
42 320x200 16.8M 70 31.5 K 25.1 M
43 640x480 32K 60 31.5 K 25.1 M
43* 640x480 32K 72 37.9 K 31.5 M
43+ 640x480 32K 75 37.5 K 31.5 M
43++ 640x480 32K 85 43.4 K 36.0 M
44 640x480 64K 60 31.5 K 25.1 M
44* 640x480 64K 72 37.9 K 31.5 M
44+ 640x480 64K 75 37.5 K 31.5 M
44++ 640x480 64K 85 43.4 K 36.0 M
45 640x480 16.8M 60 31.5 K 25.1 M
45* 640x480 16.8M 72 37.9 K 31.5 M
45+ 640x480 16.8M 75 37.5 K 31.5 M
45++ 640x480 16.8M 85 43.4 K 36.0 M
46 800x600 32K 56 35.1 K 36.0 M
46* 800x600 32K 60 37.9 K 40.0 M
46+ 800x600 32K 72 48.0 K 50.0 M
46# 800x600 32K 75 46.8 K 50.0 M
46## 800x600 32K 85 53.7 K 56.3 M
47 800x600 64K 56 35.1 K 36.0 M
47* 800x600 64K 60 37.9 K 40.0 M
47+ 800x600 64K 72 48.0 K 50.0 M
47# 800x600 64K 75 46.8 K 50.0 M
47## 800x600 64K 85 53.7 K 56.3 M
48 800x600 16.8M 56 35.1 K 36.0 M
48* 800x600 16.8M 60 37.9 K 40.0 M
48+ 800x600 16.8M 72 48.0 K 50.0 M
48# 800x600 16.8M 75 46.8 K 50.0 M
48## 800x600 16.8M 85 53.7 K 56.3 M
49i 1024x768 32K 87 35.5 K 44.9 M
49n 1024x768 32K 60 48.4 K 65.0 M
49n+ 1024x768 32K 70 56.5 K 75.0 M
49n# 1024x768 32K 75 60.2 K 80.0 M
49n## 1024x768 32K 85 68.7 K 94.5 M
4Ai 1024x768 64K 87 35.5 K 44.9 M
4An 1024x768 64K 60 48.4 K 65.0 M
4An+ 1024x768 64K 70 56.5 K 75.0 M
4An# 1024x768 64K 75 60.2 K 80.0 M
4An## 1024x768 64K 85 68.7 K 94.5 M
4Bi 1024x768 16.8M 87 35.5 K 44.9 M
4Bn 1024x768 16.8M 60 48.4 K 65.0 M
4Bn+ 1024x768 16.8M 70 56.5 K 75.0 M
4Bn# 1024x768 16.8M 75 60.2 K 80.0 M
4Bn## 1024x768 16.8M 85 68.7 K 94.5 M
4Ci 1280x1024 32K 89 48.8 K 80.0 M
4Di 1280x1024 64K 89 48.8 K 80.0 M
NOTE: i - interlaced mode
n - noninterlaced mode
For the limitation of memory bandwidth in 1MB DRAM configuration, the
following video modes is not supported in 1MB configuration: modes 45*,
45+, 46+, 46#, 47+, and 47#.
A.Low Resolution Modes (Hidden)
MODE TYPE DISPLAY SIZE COLORS SHADES ALPHA FORMAT BUFFER START
BOX SIZE MAX. PAGES
50 APA 320x240 256 40x30 A000 8x8 1
53 APA 320x240 32K 40x30 A000 8x8 1
56 APA 320x240 64K 40x30 A000 8x8 1
51 APA 400x300 256 50x38 A000 8x8 1
54 APA 400x300 32K 50x38 A000 8x8 1
57 APA 400x300 64K 50x38 A000 8x8 1
52 APA 512x384 256 64x48 A000 8x8 1
55 APA 512x384 32K 64x48 A000 8x8 1
58 APA 512x384 64K 64x48 A000 8x8 1
NOTE: 1. A/N: Alpha/Numeric
2. APA: All Point Addressable (Graphics)
I.Drivers Overview
To make use of the advance features of SiS6326, extended graphics and text
modes are supported by software application drivers developed by SiS. The
following applications are currently supported:
MicroSoft Windows 95
MicroSoft Windows NT Ver. 3.5 & 3.51 & 4.0
MicroSoft Windows 3.1
OS/2 Presentation Manager 2.1 & 3.0
3D Studio Ver. 3.0
AutoCAD/386 Release 11, 12
Auto Shade/386 Ver. 2.0
I. Windows 95
A.Version Note
The following description apply to "SiS6326 Driver Release V0.90" and
maybe later release version but not guaranteed.
A. Driver Files
The enclosed SiS6326 Windows 95 driver contains three program groups :
79. display drivers (including 2D, direct draw, direct 3D, and TV-OUT
support)
80. display utilities (monitor's center screen support, MMPlay)
81. MPEG2 video play back driver and utility
All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are
available.
A.Display Driver
1(Installation
1. Boot up Windows 95.
2. In Windows 95 "Booted" Screen,
select "My Computer" icon.
3. In "My computer" Screen,
select "Control Panel" icon.
4. In "Control Panel" Screen,
select "Display" icon.
5. In "Display Properties" Screen,
select "Settings" item.
6. In refreshed "Display Properties" Screen,
select "Change Display_Type" item.
7. In "Change Display Type" Screen,
select "Adapter Type ==> Change" item.
8. In "Select Device" Screen,
select "Have Disk..." item.
9. In "Install From Disk" Screen,
select your driver source.
e.g. A:\WIN9510.
In new "Select Device" Screen,
"SiS6326" would appear and
select "OK".
Then Windows 95 would perform driver installation.
11. After completing installation,
Windows 95 would go back to "Change Display Type" Screen,
select "Close" item.
12. Windows 95 would go back to "Display Properties" Screen,
select "Close" or "Apply" item.
13. In "System Settings Change" Screen,
select "Yes" item to restart your computer.
14. After restarting, Windows 95 will run on 640x480x256 color, 60NI.
And there are three additional items, "Display Modes" and "SiS TV-OUT"
and "SiS Gamma Correction", may be added depends on the mode setting.
For "Display Modes" item, it would appear on the following states:
82. Not in 640x480 modes for NTSC or not in 800x600 modes for PAL
83. In 640x480 modes for NTSC or in 800x600 modes for PAL but TV-OUT
is turned off
For "SiS TV-OUT" item, it would always appear.
For "SiS Gamma Correction" item, it would appear on 16-bit color (64K-
color) and 24-bit color (true color). i.e. In 16-color and 8-bit
color (256-color) modes, gamma correction function is not support.
1( Using "Display Modes"
1. Go to "Display Properties" Screen and
you will find that "Display Modes" item had been added.
2. First select "Display Modes" item and you may select
desired resolution by changing "Desktop area" pointer,
desired color by changing "Color palette" value,
desired font size by changing "Font size", and
desired refresh rate by changing "Refresh rate".
3. After completing selection,
select "OK" or "Apply" to complete the whole installation.
4. In "SiS6326 Settings" Screen,
select "OK".
5. Two cases happen :
a). You did not change "color" and/or "font size".
1. "SiS6326 Settings" Screen appears again,
2. Select "Yes" and you may work on your selected mode now.
b). You changed "color" and/or "font size".
1. System will reboot.
2. You may work on your selected mode now.
1(Using "SiS TV-OUT"
If there are S-connector or composite connector in your adapter and you had
connected your TV to one of this connector (S-connector would get more
better quality) and you had turned TV on and you are in one of 640x480x60Hz
modes for NTSC and 800x600x56Hz modes for PAL. Then,
1. Go to "Display Properties" Screen and
you will find that "SiS TV-OUT" item had been added.
2. First select "SiS TV-OUT" item and you may
84. Use "Color Calibration Tunning" to tune your color TV to get color
if it appears black/white.
85. For NTSC, use "NTSC" to select "640x480 60Hz" to get full TV
display but some information would be invisible. Or select
"560x420 60Hz" to get a small display screen on your TV.
86. For PAL, use "PAL" to select "800x600 50Hz" to get full TV display
but some information would be invisible. Or select "720x540 50Hz"
to get a small display screen on your TV.
87. Use "Screen Position" to adjust your TV display position.
88. Use "AntiFlicker Mode" to adjust the anti-flicker effect.
89. Use "Y Filter" to turn Y-filter on (image would be softer) or off
(image would be sharper).
90. Use "TV-Mode" to turn TV output on or off.
91. Note1: SiS6326 only supports TV-OUT function in the following
modes:
92. For NTSC, 640x480x60Hz and 640x400x60Hz (hidden)
93. For PAL, 800x600x60Hz and 640x480x50Hz (hidden)
94. Low resolution modes but they are hidden and used by
application programs and cannot be select for end user
95. Note2: If TV output is turned on, the display frame rate would be
forced to 60Hz. Only when you turn off TV output and close
"Display Properties" then enter "Display Properties" again, the
"Display Modes" would appear and let you set other frame rates.
3. After completing selection,
select "OK" or "Apply" to complete the whole setting.
4. Two cases happen :
96. If you did not change "NTSC" selection, you may continue your job.
97. If you change "NTSC" selection, program would refresh the screen
and ask if you want to keep it. Just click "Yes" if you want to
keep it. Or click "No" if you don't want to change.
1(Using "SiS Gamma Correction"
If you are in TV-OUT enable modes and in 16-bit color (64K-color) or 24-bit
color (true color) modes, you may use "SiS Gamma Correction" to adjust your
TV display quality to your favorite style.
1. Go to "Display Properties" Screen and
you will find that "SiS Gamma Correction" item had been added.
2. First select "SiS Gamma Correction" item and you may
98. Use "Setting Gamma" to tune your color TV's color style.
99. Use "Default" to return to the original program default setting.
100. Use "Brightness" to turn your TV to brighter or darker.
3. After completing selection,
select "OK" or "Apply" to complete the whole setting.
A.Display Utilities
1(Installation
1. From "Start Menu",
select "Run" item.
2. In "Run" Screen,
select your source execution file.
e.g. A:\SETUP (in Win95 driver disk #1)
3. In SiS6326 utility setup, SiS uses almost industry standard setup kit
"Install Shield" to provide very detail and very friendly setup
procedures. Therefore if you are familiar with computer and would
like to make some changes of the option items, you may read the
instructions and change them. If you are not familiar with computer
and don't want to change anything, then just click "Yes", "OK", or
"Next" to finish the installation.
4. A "SiS Multimedia Vx.xx" program group would be created and shown on
screen.
5. In the "SiS Multimedia Vx.xx" program group, there would be three
icons:
(1) SiS Multimedia Package: To create a small "SiS Multimedia"
icon on the corner of the screen.
(2) SiS MMPlayer: To create a "SiS MMPlayer" VCP-like icon on
the screen.
(Do not use this. It's wrong
programming.)
(3) Center Screen: An utility to adjust the position of display
on the screen.
A.MPEG2 Video Playback Utility
1(Installation
1. From "Start Menu",
select "Run" item.
2. In "Run" Screen,
select your source execution file.
e.g. A:\SETUP (in Win95 driver disk #4 "SiS6326 MPEG2 Video
Playback Utility")
3. In SiS6326 utility setup, SiS uses almost industry standard setup kit
"Install Shield" to provide very detail and very friendly setup
procedures. Therefore if you are familiar with computer and would
like to make some changes of the option items, you may read the
instructions and change them. If you are not familiar with computer
and don't want to change anything, then just click "Yes", "OK", or
"Next" to finish the installation.
4. A "SiS MPEGII " program group would be created and shown on screen.
5. In the "SiS MPEGII" program group, there would be one icon:
(1) SiS MMPlayer: To create a "SiS MMPlayer" VCP-like icon on
the screen to play MPEG2 video clippers.
1(Operation
Note: Uses "SiS MMPlayer" to play MPEG2 video clippers is just a temporary
solution to show the SiS6326 MPEG2 video decoder capability. The goal of
SiS is to provide a complete DVD solution in the final. Therefore the
operations of "SiS MMPlayer" are not all well implemented. Please wait for
further information from your supplier or SiS.
Note: Since currently "SiS MMPlayer" does not implement audio, therefore
please turn off "rate control" in the configuration menu (click "Open File
& Type Control" bottom and select "configure" item) to avoid unexpected
error.
MMPLAY.EXE Button Description
[pic]: Power On/Off
[pic]: Open File & Type Control
[pic]: Minimize This Application
[pic]: Eject CD Title (not implemented yet.)
[pic]: Fast Backward (not implemented yet)
[pic]: Fast Forward (not implemented yet)
[pic]: Mark in (not implemented yet)
[pic]: Mark out (not implemented yet)
[pic]: Pause
[pic]: Play
[pic]: Stop
[pic]: End (not implemented yet)
[pic]: Begin (not implemented yet)
[pic]: Volume increase (not implemented yet.)
[pic]: Volume decrease (not implemented yet.)
I.Windows 3.1
A. Version Notes
The following description apply to "SiS6326 Driver Release V0.90" and
maybe later release version but not guaranteed.
A. Driver Files
1. The enclosed SiS 5596 Windows 3.1 driver contains the following files
(in compressed format) :
DISK1.ID Diskette #1 ID
Setup Programs A group of programs used to setup drivers.
WIN31.1 Win31 driver files #1
DISK2.ID Diskette #2 ID
WIN31.2 Win31 driver files #2
A.Installation
The installation procedure use almost industry standard "InstallShield
Wizard" to guide user to complete the installation. Therefore to install
the driver and utilities to where they should resides, please just follow
the following procedures and the instructions on the screen.
1. Boot up Windows using standard VGA mode.
2. In Windows Program Manager Screen,
choose "File" item.
3. In "File Item List",
choose "Run" item.
4. In "Run" Screen,
select your driver source.
e.g. A:\setup
5. Follows the directions appeared on the screen to complete the
installation.
If you are not a computer expert, just use the default setting and
click "Next" or "OK" to finish the installation.
6. After installation complete,
a "SiS Multimedia Vx.xx" program group would be created and shown on
screen.
7. In the "SiS Multimedia Vx.xx" program group, there would be six
icons:
(1) SiS Multimedia Manager: To create a small "SiS Multimedia"
icon on the corner of the screen.
(2) Center Screen: An utility to adjust the position of display
on the screen.
(3) SVGA Setup: SiS VGA graphics configuration system allows
you to set resolution, colors, frame rate,
font, power saver, zooming, ßéà..etc.
(4) Gamma Correction: Dialog for you to adjust the screen color
and brightness to your preference.
(5) SiS MMPlayer: To create a "SiS MMPlayer" VCP-like icon on
the screen.
(6) unInstall: To uninstall all the installed driver files
and utilities.
A.SVGA Setup
1( Graphics Setup
1. In "SiS Multimedia Vx.xx" program group,
choose "SVGA Setup" icon to enter "SiS VGA Configuration System"
screen.
2. In "SiS VGA Configuration System" Screen,
choose which options you would like to use.
3. After completing your selections,
choose "OK" to make all your selections effective.
4. Choose "Restart Winodws"
to re-boot Windows using new settings.
Or, choose "Continue"
to continue your current Windows processes.
(But when you re-boot Windows, the new settings would take effect.)
1( Power Saving Setup
1. In "SiS VGA Configuration System" screen,
choose "power saver" item to enter "Power Saver" screen.
2. In "Power Saver" Screen,
choose which options you would like to use.
3. After completing the selections,
choose "OK" to make all your selections effective.
4. After complete setup,
the power_saver would take effect as you request when time up and
you may continue your normal process.
1( Zoom_Key Setup
0. In "SiS VGA Configuration System" screen, choose "zooming" item to
define "hot keys" for zoom-in or zoom-out screen without entering
setup program.
The operation principles of zoom-in and zoom-out are as follow:
(1) The resolution change sequence for zoom-in is
1024x768 ===> 800x600 ===> 640x480 .
(2) The resolution change sequence for zoom-out is
640x480 ===> 800x600 ===> 1024x768 .
(3) But you must first be able to zoom-in before you may zoom-out,
that means you can not get a resolution larger than that you
setup.
To use this feature, please follow the following procedures.
1. In "SiS VGA Configuration System" screen,
choose "zooming" item to enter "Zooming Hotkey" screen.
2. In "Zooming Hotkey" Screen,
choose which "hot key" you would like to use and enable it.
3. After completing the selections,
choose "OK" to make all your selections effective.
4. After complete setup,
you may use your own defined hot key to zoom-in or zoom-out screen.
1(Notes
1. The power saver's timer settings would be effective even exit Windows
back to DOS.
A.Video Operations
1( DCI Function
SiS6326 supports DCI driver for software MPEG playback and other media
player programs which could take advantage of DCI.
The SiS6326 DCI driver is automatically loaded during "Windows
Installation" process. Therefore it should be transparent to the end-user
and any media players could take advantage of it.
1( SiS MMPlayer (SW MPEG)
To make SW MPEG playback more friendly than original SW MPEG player
supplier provided, SiS provide an MMPlayer application program to provide
an VCP-like (Video Cassette Player) interface.
To take advantage of the SiS MMPlayer, you must first install "SW MPEG
Player". All the SiS provided is just an interface but not a SW MPEG
Player at present. If the SW MPEG Player does not exist, the SiS MMPlayer
will not work. (Xing or Mediamatics SW MPEG Player supported)
To use the SiS MMPlayer, you just follow the procedures below:
1. In "SiS Multimedia Vx.xx" program group,
choose "SiS MMPlayer" icon and SiS MMPlayer VCP-like icon would
appear.
2. Enjoy the SW MPEG playback as you like.
1(Notes on MMPlayer
Button Description
[pic]: Power On/Off
[pic]: Open File & Type Control
[pic]: Minimize This Application
[pic]: Eject CD Title(Not implemented yet.)
[pic]: Fast Backward
[pic]: Fast Forward
[pic]: Mark in
[pic]: Mark out
[pic]: Pause
[pic]: Play
[pic]: Stop
[pic]: End
[pic]: Begin
[pic]: Volume increase (Not implemented yet.)
[pic]: Volume decrease (Not implemented yet.)
I.Windows NT 4.0
A.Driver Files
1. The enclosed SiS6326 Windows NT 4.0 drivers are:
SISV256.DLL
SISV.DLL
SISV.SYS
SISV6326.INF
2. All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are
available.
A.Installation
1. Boot up Windows NT 4.0
2. In Windows NT 4.0 "Booted" Screen,
select "My Computer" icon.
3. In "My computer" Screen,
select "Control Panel" icon.
4. In "Control Panel" Screen,
select "Display" icon.
5. In "Display Properties" Screen,
select "Settings" item.
6. In refreshed "Display Properties" Screen,
select "Change Display Type" item.
7. In " Display Type" Screen,
select " Change" item in "Adapter Type".
8. In "Change Display" Screen, select "Have Disk..." item.
9. In "Install From Disk" Screen, select your driver source.
e.g A:\WINNT40
10. In new "Select Device" Screen, "SiS 6326" would appear
and select "OK". Then NT4.0 would perform driver installation.
11. After completing installation, NT 4.0 would go back to "Change
Display Type" Screen, select "Close" item.
12. NT40 would go back to "Display Properties" Screen,
select "Close" or "Apply" item.
13. In "System Settings Change" Screen, select "Yes" item to restart
your computer.
14. After restarting, NT4.0 will run on 640x480x256 color, 60NI.
A.Using "Display Modes"
1. Go to "Display Properties" Screen and you will find that "Display
Modes" item had been added.
2. First select "Display Modes" item and you may select
desired resolution by changing "Desktop area" pointer,
desired color by changing "Color palette" value,
desired font size by changing "Font size", and
desired refresh rate by changing "Refresh rate".
3. After completing selection, select "OK" or "Apply" to complete the
whole installation.
4. In "SiS 6326 Settings" Screen, select "OK".
5. Two cases happen :
a) You did not change "color" and/or "font size".
i. "SiS 6326 Settings" Screen appears again,
ii. Select "Yes" and you may work on your selected mode now.
b) You changed "color" and/or "font size".
System will reboot.
You may work on your selected mode now.
I.Windows NT 3.5 & 3.51
A.Driver Files
1. The enclosed SiS6326 Windows NT 3.5 & 3.51 drivers are:
SISTAG
SISV.SYS
SISV256.DLL
SISV.DLL
OEMSETUP.INF
2. All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are
available.
A.Installation
1. Boot up Windows NT 3.5 or 3.51.
2. Run the following procedures:
a) Control Panel
b) Display
c) Change Display Type
d) Change
e) Other...
Then respond to installation prompts.
I.Autodesk ADI 4.2 -Protected Mode
A.General Description
1(Driver Files
1. The enclosed SiS6326 ADI driver contains the following file:
RCPSIS.EXP SiS ADI Driver (for all resolutions & colors)
Note: This version of ADI driver does not support 16-color operation.
2. This driver fits for a series of Autodesk Inc. products including:
(1) AutoCAD/386 R11
(2) AutoCAD/386 R12
(3) AutoShade/386 V2.0
(4) 3D Studio V3.0
3. Their installtion procedures are different from one program to the
others.
But the first step of installation is the same for all these
programs, that is
"To unpack and copy drivers to where you would like them to reside."
Therefore, we will state this step below.
4. As to the real installation procedures for each program, we will give
a detail description in the following paragraph.
1(Unpack & Copy
To unpack and copy drivers to where they should resides,
please follow the following procedures:
1. Run "INSTDRV.EXE" where it resides.
3. In "SiS Super VGA Drivers Installation" menu,
select "A. ADI 4.2" to unpack and copy drivers.
(To select, type "A".)
5. In "Unpack & Copy ADI 4.2 Drivers" screen,
keyin the "drive:\directory" where these drivers would reside
(default C:\ADI42).
Program would unpack & copy all related driver files to where you
assign.
6. After "unpack and copy" completed,
exit the INSTDRV.EXE program.
7. Refer to Sec. 5.1 to Sec. 5.4 for the real installation procedures
for each program.
A.AutoCAD R11 Setup
1. The following procedures assume that
(1) You have complete "unpack & copy" procedure.
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Add the following setting to your own batch file for AutoCAD R11 (say
ACADR11.BAT) or to your "AUTOEXEC.BAT" file:
SET DSPADI=\ADI42\RCPSIS.EXP <Enter>
3. Delete the configure file ACAD.CFG resides in \ACAD directory.
4. Type
ACADR11 <Enter>
to configure your AutoCAD R11 system.
5. In "Select Display Device:" item,
choose "ADI P386 V4.0/4.1 display.".
6. In "Select Display Resolution" screen,
choose which display driver you want to use.
7. Go through the whole instrutions, and the system would start with the
desired display setting.
A.AutoCAD R12 Setup
1. The following procedures assume that
(1) You have complete "unpack & copy" procedure.
(2) Your SiS ADI 4.2 drivers are located in C:\ADI42.
(3) Your AutoCAD R12 program is located in C:\ACADR12.
(4) Your AutoCAD R12 default drivers are located in C:\ACADR12\DRV.
(5) Your AutoCAD R12 configure file ACAD.CFG is located in
C:\ACADR12.
2. Copy the following driver file to C:\ACADR12\DRV:
RCPSIS.EXP
.
You may complete this step by
COPY C:\ADI42\RCPSIS.EXP C:\ACADR12\DRV
.
3. Delete your original ACAD.CFG file.
You may complete this step by
DEL C:\ACADR12\ACAD.CFG
.
4. Restart your AutoCAD R12 program as usual.
5. AutoCAD R12 will ask you to complete the configuration procedures
since it can't find the configure file ACAD.CFG.
6. Follow the instructions of AutoCAD R12 to proceed configuration.
7. In "Available Video Displays:" item,
choose the "SiS Super VGA ADI v4.2 Display and Rendering driver"
item.
8. In "Select Display Resolution" screen,
choose which display driver you want to use.
9. Go through the whole instructions, and the system would start with
the selected display setting.
A.AutoShade R2.0 Setup
1. The following procedures assume that
(1) You have complete "unpack & copy" procedure.
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Add the following settings to your batch file for AutoShade R2.0 (say
SHADE2.BAT) or to your "AUTOEXEC.BAT" file.
(a) For display driver setting,
SET DSPADI=\ADI42\RCPSIS.EXP
.
(b) For rendering driver setting,
SET RDPADI=\ADI42\RCPSIS.EXP
.
3. Delete the configure file SHADE.CFG.
4. Type
SHADE2 <Enter>
to re-configure the AutoShade.
5. While prompting "Select display device:",
choose "P386 AutoDesk Device Interface display driver.".
6. While prompting "Select rendering display driver:",
choose "P386 AutoDesk Device Interface rendering driver.".
7. Go through all the instructions,
the system would start with the desired display setting.
A.3D Studio Version 3.0 Setup
1. The following procedures assume that
(1) You have complete "unpack & copy" procedure.
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Create your own 3D Studio V3.0 batch file (say 3DS3.BAT) and add the
following settings to it, or
add the following settings to your "AUTOEXEC.BAT" file.
(1) SET RCPADI=C:\ADI42\RCPSIS.EXP
(2) SET RDPADI=C:\ADI42\RCPSIS.EXP
3. Execute the new 3DS batch file or
reboot the computer using the new "AUTOEXEC.BAT"
as to make the new settings effective.
4. Change your current working directory to \3DS3
(where your 3D Studio V3.0 usually resides).
5. Delete original configuration file "3DADI.CFG".
6. Type
3DS VIBCGF <Enter>
to configure your display environment.
7. After the "Company Register Screen" appears,
press <Enter>
to continue.
8. The "Video Environment Configuration Screen" will appear.
Please follow the following procedures to configure your video
display environment.
(1) In "Main-Display" item,
(a) Press <Enter>
The selection menu will appear.
(b) In selection menu,
move cursor to "RCPADI".
Press <Enter>
to select.
(2) In "Material-Display" item,
(a) Press <Enter>
The selection menu will appear.
(b) In selection menu,
move cursor to "RCPADI".
Press <Enter>
to select.
(3) In "Render-Display" item,
(a) Press <Enter>
The selection menu will appear.
(b) In selection menu,
move cursor to "RCPADI" or "RDPADI".
Press <Enter>
to select.
(4) Complete the other selections and exit configuration.
9. After exit configure,
3DS will boot automatically
using the environment you just select.
10. If your previous configuration is OK,
3DS will ask you to make detail configuration for SiS6326 drivers.
If this didn't happen,
please check your previous procedures or contact the technical
support people.
11. In the detail configuration for SiS6326 drivers,
just follow the instructions appear on the screen and make your own
choice.
If you are confused in anything, contact the technical support people
for solution.
12. After detail configuration,
you will enter the 3DS main display screen and
you may begin your 3D Studio work
in the environment you make before.
13. Once completing the detail configuration,
you may enter 3D Studio in the same configuration simply by type
\3DS3\3DS <Enter>
next time.
14. If you want to change your video configuration,
just follow the procedures mentioned before to re-configure.
I.OS/2 V2.1
A.Driver Notes
1. The following description apply to "SiS6326 Driver Release V1.01" and
maybe later release version but not guaranteed.
A.Driver Files
1. The enclosed SiS6326 OS/2 2.1 driver contains the following files:
SISINST.CMD SiS driver install program
SVGA.EXE SiS PMI Generator
S768256.DL@ SiS IBMDEV32.DLL Display Driver
OTHERS other files required during installation
A.Installation
Before install SiS6326 OS/2 drivers, make sure:
1. Install your OS/2 system using "VGA display" option (i.e. standard
VGA).
2. Start your OS/2 system.
Install SiS6326 OS/2 2.1 drivers as following procedures:
1. Enter "OS/2 window" or "OS/2 full screen".
2. Change directory to which holds the SiS6326 OS/2 2.1 display drivers
and type
SISINST <Enter>.
For example,
A:\OS2\SBCS.21>SISINST
3. All the Driver Files will be copied to a subdirectory C:\SISDRV and
the "Select Screen parameters for SiS SVGA" menu appears and all the
resolution (and color) and frame rate supported would be shown on the
screen.
4. Choose which one you would like to use and click "OK".
5. Then installation program would complete all installation process and
create a "SiS Setup" for future change mode usage.
6. Shutdown and re-boot OS/2 to make your selection effectively.
I.OS/2 V3.0 (Warp)
A.Driver & OS/2 Version Notes
1. The following description apply to "SiS6326 Driver Release V0.90" and
maybe later release version but not guaranteed.
2. All the OS/2 Warp Versions up to SiS6326 driver Rev. 0.90 would be
installed as described in this section except for Double Bytes OS/2
Warp (i.e. Chinese, Japanese, Korea, etc.).
3. For Double Bytes OS/2 Warp installation, please refer to "Sec. 11
Double Bytes OS/2 Warp".
A.Driver Files
1. The enclosed SiS6326 OS/2 3.0 driver contains the following files:
SISINST.CMD SiS driver install program
SVGA.EXE SiS PMI Generator
S768256.DL@ SiS IBMDEV32.DLL Display Driver
OTHERS other files required during installation
A.Installation
Before install SiS6326 OS/2 drivers, make sure:
1. Install your OS/2 system using "VGA display" option (i.e. standard
VGA).
2. Start your OS/2 system.
Install SiS6326 OS/2 Warp drivers as following procedures:
1. Enter "OS/2 window" or "OS/2 full screen".
2. Change directory to which holds the SiS6326 OS/2 3.0 display drivers
and type
SISINST <Enter>.
For example,
A:\OS2\SBCS.30>SISINST
3. All the Driver Files will be copied to a subdirectory C:\SISDRV and
the "Select Screen parameters for SiS SVGA" menu appears and all the
resolution (and color) and frame rate supported would be shown on the
screen.
4. Choose which one you would like to use and click "OK".
5. Then installation program would complete all installation process and
create a "SiS Setup" for future change mode usage.
6. Shutdown and re-boot OS/2 to make your selection effectively.
I. Double Bytes OS/2 Warp
A.Driver & OS/2 Version Notes
1. The following description apply to "SiS6326 Driver Release V0.90" and
maybe later release version but not guaranteed.
2. The following description apply to "Double Bytes OS/2 Warp" only.
(i.e. Chinese, Japanese, Korea, etc.)
3. For other versions OS/2 Warp installation, please refer to "Sec. 2
OS/2 V3.0 (Warp)".
A.Driver Files
1. The enclosed SiS6326 Double Byte OS/2 3.0 driver contains the
following files:
SETUP.CMD SiS driver install program
SVGA.EXE SiS PMI Generator
S768256.DL@ SiS IBMDEV32.DLL Display Driver
OTHERS other files required during installation
A.Installation
For Double Byte OS/2 Warp limitation, the installation process is a two-
phase installation and can't complete the whole installation in one-time-
process.
1st phase: copy files, modify "config.sys", create "SiS Install"
icon
then shutdown and re-boot OS/2.
2nd phase: double clicks "SiS Install" icon to complete the
installation
Before install SiS6326 OS/2 drivers, make sure:
1. Install your OS/2 system using "VGA display" option (i.e. standard
VGA).
2. Start your OS/2 system.
Install SiS6326 OS/2 Warp drivers as following procedures:
1st phase:
1. Enter "OS/2 window" or "OS/2 full screen".
2. Change directory to which holds the SiS6326 OS/2 3.0 display drivers
and type
SETUP <Enter>,
For example,
A:\OS2\DBCS.30>SETUP
3. All the Driver Files will be copied to a subdirectory C:\SISDRV and
"SiS Install" icon would be created.
4. After completing "setup" program, shutdown and re-boot OS/2.
2nd phase:
5. After re-booting OS/2, double clicks "SiS Install" icon.
Then the "SiS Install" icon would be executed automatically and
"Select Screen parameters for SiS SVGA" screen would appeared on the
screen.
6. Select the desired resolution (and color) and frame rate on this
screen,
then click "OK" to complete installation and "SiS Setup" icon would
be created for future change modes and frame rate usage.
7. After completing installation, shutdown and re-boot OS/2 to make your
selection effectively.
I.COPYRIGHT NOTICE
COPYRIGHT 1997, Silicon Integrated Systems Corp. ALL RIGHTS RESERVED.
This manual is copyrighted By Silicon Integrated Systems Corp. You may not
reproduce, transmit, transcribe, store in a retrieval system, or translate
into any language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, any part of this
publication without the express written permission of Silicon Integrated
Systems Corp.
TRADEMARKS
SiS is a registered trademark of Silicon Integrated Systems Corp.
All brand or product names mentioned are trademarks or registered
trademarks of their respective holders.
DISCLAIMER
Silicon Integrated Systems Corp. makes no representations or warranties
regarding the contents of this manual. We reserve the right to revise the
manual or make changes in the specifications of the product described
within it at any time without notice and without obligation to notify any
person of such revision or change.
The information contained in this manual is provided for general use by our
customers. Our customers should be aware that the personal computer field
ins the subject of many patents. Our customers should ensure that they take
appropriate action so that their use of our products does not infringe upon
any patents. It is the policy of Silicon Integrated Systems Corp. To
respect the valid patent rights of third parties and not to infringe upon
or assist others to infringe upon such rights.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to
restrictions set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at 252.277-7013.
(.txt)
(.txt)